We have the tools you need for a successful restoration.
Questions or Help Ordering,
Call 800-321-9260
For Questions or to Place an Order,
Call 800-321-9260
For Questions or to Place an Order,
Call 800-321-9260   

Baldor® 1/3HP Buffer and 11 Gauge Steel Stand

TP Tools
Baldor® 1/3HP Buffer and 11 Gauge Steel Stand
Item#
8450-12
MPN#
8450-12
UPC#
728044203132
Our Price: $649.00
Zone 1 Zone 2 Zone 3
$75.00 $90.00 $115.00
Zone Map
In-Stock Ground Ship Only

SAVE when you buy Buffer and Buffing Stand!

Baldor® Buffers are made in USA and warranted for 3 full years against burnouts. They are built for heavy work loads and are recognized for high quality and dependability.

1/3 HP Buffer - 3600 RPM - For Home Restorer Use. Brings back original finish to tarnished brass, chrome, silver, stainless, aluminum, etc. Single phase 115 volt, 3.1 amp motor has on/off switch on motor base and 8 ft cord. Plugs into 115 volt home circuit, so setup is fast and easy. Accepts 6" diameter buffing wheels x 1/2" arbor hole - wheels can be stacked for a wider buff surface. 18" overall shaft length (3" from end of shaft to housing). Includes nuts and flanges. 1/2" arbor. Buffing wheels not included. 3 year warranty against burnout. Made in USA.

11 Gauge Steel Buffing Stand - Mount buffer to 11 gauge all-welded steel stand for a sturdy stand-alone unit. Heavy-duty steel buffing stand is 30-1/2" high with 18" wide x 15-3/4" deep reinforced base. Made in USA. Mounting buffer to stand gives you instant access and more room to buff larger pieces that might not be possible if buffer were simply mounted to a workbench.

Ship wt: 73 lbs, 2 ctns.

Face, eye and respiratory protection required when buffing.

SAVE when you buy Buffer and Buffing Stand!

Baldor® Buffers are made in USA and warranted for 3 full years against burnouts.They are built for heavy work loads and are recognized for high quality and dependability.

1/3 HP Buffer - 3600 RPM - For Home Restorer Use. Brings back original finish to tarnished brass, chrome, silver, stainless, aluminum, etc. Single phase 115 volt, 3.1 amp motor has on/off switch on motor base and 8 ft cord. Plugs into 115 volt home circuit, so setup is fast and easy. Accepts 6" diameter buffing wheels x 1/2" arbor hole - wheels can be stacked for a wider buff surface. 18" overall shaft length (3" from end of shaft to housing). Includes nuts and flanges. 1/2" arbor. Buffing wheels not included. 3 year warranty against burnout. Made in USA.

11 Gauge Steel Buffing Stand - Mount buffer to 11 gauge all-welded steel stand for a sturdy stand-alone unit. Heavy-duty steel buffing stand is 30-1/2" high with 18" wide x 15-3/4" deep reinforced base. Made in USA.Mounting buffer to stand gives you instant access and more room to buff larger pieces that might not be possible if buffer were simply mounted to a workbench.

Ship wt: 73 lbs, 2 ctns.

Face, eye and respiratory protection required when buffing.

Our Technicians Suggest
Deluxe Face Shield with Headgear
Item#
8061-98
MPN#
5145
UPC#
781311051454
Sale $17.00
Reg. $18.95
Save 10%
In-Stock
Gerson® Signature ProSeries Paint/Body Combo Respirator, Med
Sale $30.00
Reg. $32.95
Save 9%
In-Stock
Reviews and Q&A for Item # 8450-12
topTop