If you have 40 cfm air or more (15-25 HP compressor), this gun is highly recommended for your glass bead cabinet. Hook up this extra heavy-duty power gun to your unit instead of the C-35 gun normally included in most Skat Blast® Cabinets and see a BIG DIFFERENCE in the speed of rust and paint removal.
Larger 3/16" air jet and 5/16" tungsten carbide nozzle will easily double or triple your production. Recommended only for use with the larger air compressors (15-25 HP required). Complete with handle assembly, nozzle and air jet installed in gun. 5/8" ID siphon hose slips onto bottom inlet. 1/4" female pipe thread air inlet at rear of gun.
1-3/8" wide, 7-1/8" high, 4-5/8" deep. Ship wt: 3 lbs.
Made in USA.