We have the tools you need for a successful restoration.
Questions or Help Ordering,
Call 800-321-9260
For Questions or to Place an Order,
Call 800-321-9260
For Questions or to Place an Order,
Call 800-321-9260   

Super-Pro Magna-Spot® Stud Gun Weld Kit

Motor Guard
Super-Pro Magna-Spot® Stud Gun Weld Kit
Watch Videos
To view full screen, click the play button and then click the bottom right corner of video or press the "f" key.
Using the Magna-Spot Dent Repair System from Motor Guard
Item#
8038-21
MPN#
492
UPC#
601965004920
Sale $469.00
Reg. $499.00
$30.00 off
Zone 1 Zone 2 Zone 3
$20.00 $20.00 $20.00
Zone Map
In-Stock Ground Ship Only

Professionally remove dents in hoods, fenders, deck lids, or any other sheet metal panel on your car, truck, or tractor. Simply plug Magna-Spot® into 115 volt 15 amp outlet, insert draw pin into stud gun, hold against clean metal surface, and press trigger for 1/2 to 1 second. Instantly, Magna-Spot® welds draw pin to metal surface where it can be pulled out using slide hammer supplied in kit. Once dent is pulled, grind off draw pin flush with metal surface, and finish with body filler. For large dents, several pins can be welded in a series.

Moulding trim rivets for holding aluminum, stainless, or plastic trim clips can also be welded using the rivet electrode and rivets (included). Insert trim rivet into stud gun, place against clean metal surface until outer ring is seated, press trigger for 1/2 to 1 second; and rivet will now be welded to metal. After painting, plastic or metal trim clips will slide over rivets and hold your trim in place.

Shrink high spots and expand small dents by using the shrink/expand electrode (included). Place Magna-Spot® Gun against clean metal surface until outer ring is seated, press trigger for 1/2 second, two or three times to heat metal. Generally, small high spots will disappear. If high spot does not shrink, tap lightly with body hammer. If a dent does not expand, apply a damp cloth to the heated metal to raise the surface.

The Super-Pro Plus Magna-Spot® Gun Kit is designed with the professional restorer in mind. Features most powerful gun, which is necessary when welding studs on older (thicker) body panels. Produces a high 2000 amp secondary current at the metal, which will ensure proper penetration when securing draw pins or trim rivets on heavier metals. If you restore old cars, go with the spot gun kit that has the power to perform!

Kit includes: The Super-Pro Plus Magna-Spot® Stud Welder Gun, heavy-duty slide hammer, the Magna T-Puller for small dents, (250) 2.0 mm draw pins, (250) 2.5 mm draw pins, 150 trim rivets with electrode tip, shrinking/expanding electrode tip, 1/2 lb of Magna Wire and Electrode Kit (includes draw pin electrode tip - 2.0 and 2.5 mm) for large dents, instructions, and a handy carrying case for easy storage. Ship wt: 27 lbs. Made in USA.

Professionally remove dents in hoods, fenders, deck lids, or any other sheet metal panel on your car, truck, or tractor. Simply plug Magna-Spot® into 115 volt 15 amp outlet, insert draw pin into stud gun, hold against clean metal surface, and press trigger for 1/2 to 1 second. Instantly, Magna-Spot® welds draw pin to metal surface where it can be pulled out using slide hammer supplied in kit. Once dent is pulled, grind off draw pin flush with metal surface, and finish with body filler. For large dents, several pins can be welded in a series.

Moulding trim rivets for holding aluminum, stainless, or plastic trim clips can also be welded using the rivet electrode and rivets (included). Insert trim rivet into stud gun, place against clean metal surface until outer ring is seated, press trigger for 1/2 to 1 second; and rivet will now be welded to metal. After painting, plastic or metal trim clips will slide over rivets and hold your trim in place.

Shrink high spots and expand small dents by using the shrink/expand electrode (included). Place Magna-Spot® Gun against clean metal surface until outer ring is seated, press trigger for 1/2 second, two or three times to heat metal. Generally, small high spots will disappear. If high spot does not shrink, tap lightly with body hammer. If a dent does not expand, apply a damp cloth to the heated metal to raise the surface.

The Super-Pro Plus Magna-Spot® Gun Kit is designed with the professional restorer in mind. Features most powerful gun, which is necessary when welding studs on older (thicker) body panels. Produces a high 2000 amp secondary current at the metal, which will ensure proper penetration when securing draw pins or trim rivets on heavier metals. If you restore old cars, go with the spot gun kit that has the power to perform!

Kit includes: The Super-Pro Plus Magna-Spot® Stud Welder Gun, heavy-duty slide hammer, the Magna T-Puller for small dents, (250) 2.0 mm draw pins, (250) 2.5 mm draw pins, 150 trim rivets with electrode tip, shrinking/expanding electrode tip, 1/2 lb of Magna Wire and Electrode Kit (includes draw pin electrode tip - 2.0 and 2.5 mm) for large dents, instructions, and a handy carrying case for easy storage. Ship wt: 27 lbs. Made in USA.

Our Technicians Suggest
STEINER ProSeries™ Leather Welding/Plasma Gloves
Sale $23.00
Reg. $25.95
Save 11%
In-Stock
Full-Face Grinding & Cutting Shield
Item#
ATD-3746
MPN#
3746
UPC#
663126037468
Our Price: $27.95
In-Stock
Reviews and Q&A for Item # 8038-21
topTop